Artwork · 4 min read
Print size and placement
A design that looks right on screen can look too small, too big or too low once it's on a body. These common sizes are a good starting point. Every garment and size is different, so check the preview in the Mockup Studio.
Common sizes
| Placement | Typical width | Notes |
|---|---|---|
| Left chest | 3"–4" | Logo spot, centered roughly over the heart |
| Full front (adult) | 10"–12" | Smaller adult sizes often look better around 10" |
| Full back | 12"–14" | Often starts 3"–5" below the collar |
| Hoodie front | ~10" | Has to fit between the neckline and the front pocket |
| Sleeve | ~3" | Short text or a small mark |
Placement tips
- Too low is the most common mistake. A full-front print usually starts about 3" below the collar seam. Lower than that, it drifts toward the stomach.
- Tall, narrow designs and wide, short designs aren't sized the same way. Judge by the longer side against the print area.
- Hoodie pockets and drawstrings sit over the print area, so keep key text above the pocket.
- The same print looks bigger on a small shirt than on a 2XL. If you're ordering many sizes, pick a size that works on the smallest one.